| 标准 | 英文名称 | 中文名称 |
| EN 1074-1 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements | 供水阀门 - 适用性要求和适当的验证测试 - 第 1 部分：一般要求 |
| EN 1074-2 | Valves for water supply -Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves | 供水阀门 - 适合用途要求和适当的验证测试 - 第 2 部分：隔离阀 |
| EN 1111 | Sanitary Tapware - Thermostatic Mixing Valves (pn 10) - General Technical Specification | 卫生水龙头 - 恒温混合阀 (pn 10) - 通用技术规范 |
| EN 1112 | Sanitary Tapware - Shower Outlets for Sanitary Tapware for Water Supply Systems of Type 1 and Type 2 - General Technical Specification | 卫生水龙头 - 1 型和 2 型供水系统用卫生水龙头的淋浴出口 - 通用技术规范 |
| EN 1113 | Sanitary Tapware - Shower Hoses for Sanitary Tapware for Water Supply Systems of Type 1 and Type 2 - General Technical Specification | 卫生水龙头 - 用于 1 型和 2 型供水系统的卫生水龙头的淋浴软管 - 通用技术规范 |
| EN 1213 | Building Valves - Copper Alloy Stopvalves For Potable Water Supply In Buildings - Tests And Requirements | 建筑阀门 - 建筑饮用水用铜合金截止阀 - 测试和要求 |
| EN 12288 | Industrial valves - Copper alloy gate valves | 工业阀门 - 铜合金闸阀 |
| EN 12293 | Plastics Piping Systems - Thermoplastics Pipes And Fittings For Hot And Cold Water - Test Method For The Resistance Of Mounted Assemblies To Temperature Cycling | 塑料管道系统 - 热水和冷水用热塑性塑料管道和配件 - 已安装组件对温度循环的抵抗力的测试方法 |
| EN 12294 | Plastics Piping Systems - Systems For Hot And Cold Water - Test Method For Leaktightness Under Vacuum | 塑料管道系统 - 热水和冷水系统-真空下密封性的测试方法 |
| EN 12295 | Plastics Piping Systems - Thermoplastics Pipes And Associated Fittings For Hot And Cold Water - Test Method For Resistance Of Joints To Pressure Cycling | 塑料管道系统 - 热水和冷水用热塑性塑料管道和相关配件 - 接头耐压力循环的试验方法 |
| EN 1253-1 | Gullies for buildings Part 1: Trapped floor gullies with a depth water seal of at least 50 mm | 建筑物的沟壑 第 1 部分：水封深度至少为 50 mm 的夹层排水沟 |
| EN 1253-2 | Gullies for buildings Part 2: Roof drains and floor gullies without trap | 建筑物的沟壑 第 2 部分：无存水弯的屋顶排水沟和地沟 |
| EN 12541 | Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 | 卫生水龙头 - 压力冲洗阀和自动关闭小便池阀 PN 10 |
| EN 1254-1 | Copper And Copper Alloys - Plumbing Fittings - Fittings With Ends For Capillary Soldering Or Capillary Brazing To Copper Tubes | 铜和铜合金 - 管道配件 - 用于毛细管焊接或毛细管钎焊到铜管的端部配件 |
| EN 1254-2 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes | 铜和铜合金 - 管道配件 - 第 2 部分：与铜管一起使用的带压缩端的配件 |
| EN 1254-3 | Copper And Copper Alloys - Plumbing Fittings - Fitting With Compression Ends For Use With Plastics Pipes | 铜和铜合金 - 管道配件 - 带压缩端的配件，用于塑料管道 |
| EN 1254-4 | Copper and copper alloys - Plumbing fittings - Part 4: Fittings with threaded end connections | 铜和铜合金 - 管道配件 - 第 4 部分：带螺纹端接的配件 |
| EN 1254-5 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes | 铜和铜合金 - 管道配件 - 第 5 部分：用于毛细管钎焊到铜管的短端配件 |
| EN 1254-6 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends | 铜和铜合金 - 管道配件 - 第6部分：带推入配合端的配件 |
| EN 1254-7 | Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes | 铜和铜合金 - 管道配件 - 第 7 部分：用于金属管的压装配件 |
| EN 1254-8 | Copper and copper alloys. Plumbing fittings. Fittings with press ends for use with plastics and multilayer pipes | 铜及铜合金。水暖配件。用于塑料和多层管的带压端接头 |
| EN 1286 | Sanitary Tapware - Low-pressure Mechanical Mixing Valves - General Technical Specification | 卫生水龙头 - 低压机械混合阀 - 一般技术规范 |
| EN 1287 | Sanitary Tapware - Low Pressure Thermostatic Mixing Valves - General Technical Specification | 卫生水龙头 - 低压恒温混合阀 - 通用技术规范 |
| EN 13407 | Wall-hung urinals - Functional requirements and test methods | 壁挂式小便器 - 功能要求和测试方法 |
| EN 13618 | Flexible Hose Assemblies In Drinking Water Installations - Functional Requirements And Test Methods | 饮用水装置中的柔性软管组件 - 功能要求和测试方法 |
| EN 13828 | Building Valves - Manually Operated Copper Alloy And Stainless Steel Ball Valves For Potable Water Supply In Buildings -tests And Requirements | 建筑阀门 - 用于建筑饮用水的手动操作铜合金和不锈钢球阀 - 测试和要求 |
| EN 13959 | Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D | 防污染止回阀 - DN 6 至 DN 250，包括 E 系列，A、B、C 和 D 型 |
| EN 15091 | Sanitary Tapware - Electronic Opening And Closing Sanitary Tapware | 卫生水龙头 - 电子开合卫生水龙头 |
| EN 15092 | Building valves - Inline hot water supply tempering valves - Tests and requirements | 建筑阀门 - 在线热水供应回火阀 - 测试和要求 |
| EN 1567 | Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests | 建筑阀门 - 水减压阀和组合水减压阀 - 要求和测试 |
| EN 16145 | Sanitary Tapware - Extractable Outlets For Sink And Basin Mixers - General Technical Specification | 卫生水龙头 - 水槽和面盆混合器的可抽出式出口 - 通用技术规范 |
| EN 16146 | Sanitary Tapware - Extractable Shower Hoses For Sanitary Tapware For Supply Systems Type 1 And Type 2 - General Technical Specification | 卫生水龙头 - 用于供应系统 1 型和 2 型的卫生水龙头的可抽出淋浴软管 - 通用技术规范 |
| EN 1717 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow | 水装置中的饮用水污染防护和防止回流污染装置的一般要求 |
| EN 200 | Sanitary Tapware – Single taps and combination taps for water supply systems of type 1 and type 2 – General technical specification | 卫生水龙头 - 1 型和 2 型供水系统的单水龙头和组合水龙头 - 通用技术规范 |
| EN 246 | Sanitary Tapware - General Specifications For Flow Rate Regulators | 卫生水龙头 - 流量调节器的一般规范 |
| EN 248 | Sanitary Tapware - General Specification For Electrodeposited Coatings Of Ni-cr | 卫生水龙头。镍铬电沉积涂层的通用规范 |
| EN 274-1 | Waste Fittings For Sanitary Appliances - Part 1: Requirements | 卫生器具的废物配件 - 第 1 部分：要求 |
| EN 274-2 | Waste Fittings For Sanitary Appliances - Part 2: Test Methods | 卫生器具的废弃配件 - 第 2 部分：测试方法 |
| EN 61770 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets | 连接到水管的电器 - 避免反虹吸和软管组故障 |
| EN 712 | Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull- out under constant longitudinal force | 热塑性塑料管道系统 - 压力管和管件之间的端部承载机械接头 - 恒定纵向力下抗拔出性的试验方法 |
| EN 713 | Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes – Test method for leaktightness under internal pressure of assemblies subjected to bending | 塑料管道系统 - 管件和聚烯烃压力管之间的机械接头 - 弯曲组件在内部压力下的密封性试验方法 |
| EN 816 | Sanitary tapware – Automatically shut-off valves PN10 | 卫生水龙头 – 自动关闭阀 PN10 |
| EN 817 | Sanitary tapware – Mechanical mixing valves (PN10) – General technical specifications | 卫生水龙头 – 机械混合阀 (PN10) – 一般技术规范 |
| EN 921 | Plastics piping systems - Thermoplastics pipes - Determination of resistance to internal pressure at constant temperature | 塑料管道系统 - 热塑性塑料管道 - 恒温下耐内压的测定 |
| EN 997 | WC pans and WC suites with integral trap | WC 马桶和 WC 套件，带集成式存水弯 |
| EN ISO 1167-1 | Thermoplastics Pipes, Fittings And Assemblies For The Conveyance Of Fluids - Determination Of The Resistance To Internal Pressure - Part 1: General Method | 流体输送用热塑性塑料管、管件和组件 - 内压阻力的测定 - 第 1 部分：通用方法 |
| EN ISO 1167-2 | Thermoplastics Pipes, Fittings And Assemblies For The Conveyance Of Fluids - Determination Of The Resistance To Internal Pressure - Part 2: Preparation Of Pipe Test Pieces | 流体输送用热塑性塑料管道、管件和组件 - 内压阻力的测定 - 第 2 部分：管道试件的制备 |
| EN ISO 15874-2 | Plastics Piping Systems For Hot And Cold Water Installations - Polypropylene (Pp) - Part 2: Pipes | 用于热水和冷水装置的塑料管道系统 - 聚丙烯 (Pp) - 第 2 部分：管道 |
| EN ISO 15874-3 | Plastics Piping Systems For Hot And Cold Water Installations - Polypropylene (Pp) - Part 3: Fittings (ISO 15874-3:2013) | 用于热水和冷水装置的塑料管道系统 - 聚丙烯 (Pp) - 第 3 部分：配件 (ISO 15874-3:2013) |
| EN ISO 15874-5 | Plastics Piping Systems For Hot And Cold Water Installations - Polypropylene (Pp) - Part 5: Fitness For Purpose Of The System | 用于热水和冷水装置的塑料管道系统 - 聚丙烯 (Pp) - 第 5 部分：系统适用性 |
| EN ISO 15875-2 | Plastics Piping Systems For Hot And Cold Water Installations - Crosslinked Polyethylene (pe-x) - Part 2: Pipes | 用于热水和冷水装置的塑料管道系统 - 交联聚乙烯 (pe-x) - 第 2 部分：管道 |
| EN ISO 15875-3 | Plastics Piping Systems For Hot And Cold Water Installations - Crosslinked Polyethylene (pe-x) - Part 3: Fittings | 用于热水和冷水装置的塑料管道系统 - 交联聚乙烯 (pe-x) - 第 3 部分：管件 |
| EN ISO 15875-5 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Technical Corrigendum 1 | 用于热水和冷水装置的塑料管道系统 - 交联聚乙烯 (PE-X) - 第 5 部分：系统适用性 - 技术勘误 1 |
| EN ISO 21003-2 | Multilayer Piping Systems For Hot And Cold Water Installations Inside Buildings - Part 2: Pipes | 建筑物内冷热水装置的多层管道系统 - 第 2 部分：管道 |
| EN ISO 21003-3 | Multilayer Piping Systems For Hot And Cold Water Installations Inside Buildings - Part 3: Fittings | 建筑物内热水和冷水装置的多层管道系统 - 第 3 部分：配件 |
| EN ISO 21003-5 | Multilayer Piping Systems For Hot And Cold Water Installations Inside Buildings - Part 5: Fitness For Purpose Of The System | 建筑物内冷热水装置的多层管道系统 - 第 5 部分：系统适用性 |
| EN ISO 22391-2 | Plastics Piping Systems For Hot And Cold Water Installations - Polyethylene Of Raised Temperature Resistance (Pe-Rt) - Part 2: Pipes | 用于热水和冷水装置的塑料管道系统 - 耐高温聚乙烯 (Pe-Rt) - 第 2 部分：管道 |
| EN ISO 22391-3 | Plastics Piping Systems For Hot And Cold Water Installations - Polyethylene Of Raised Temperature Resistance (Pe-Rt) - Part 3: Fittings | 用于热水和冷水装置的塑料管道系统 - 耐高温聚乙烯 (Pe-Rt) - 第 3 部分：管件 |
| EN ISO 22391-5 | Plastics Piping Systems For Hot And Cold Water Installations - Polyethylene Of Raised Temperature Resistance (pe-rt) - Part 5: Fitness For Purpose Of The System | 用于热水和冷水装置的塑料管道系统 - 耐高温聚乙烯(pe-rt) - 第 5 部分：系统适用性 |
| EN ISO 5208 | Industrial valves - Pressure testing of metallic valves | 工业阀门 - 金属阀门的压力测试 |
| EN ISO 6509 | Corrosion Of Metals And Alloys - Determination Of Dezincification Resistance Of Copper Alloys With Zinc | 金属和合金的腐蚀-含锌铜合金抗脱锌性的测定 |
| EN ISO 9227 | Corrosion tests in artificial atmospheres. Salt spray tests | 人工环境中的腐蚀试验。盐雾试验 |
| UNE EN 1074-1 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements | 供水阀门 - 适用性要求和适当的验证测试 - 第 1 部分：一般要求 |
| UNE EN 1074-2 | Valves for water supply -Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves | 供水阀门 - 适合用途要求和适当的验证测试 - 第 2 部分：隔离阀 |
| UNE EN 1111 | Sanitary Tapware - Thermostatic Mixing Valves (pn 10) - General Technical Specification | 卫生水龙头 - 恒温混合阀 (pn 10) - 通用技术规范 |
| UNE EN 1112 | Sanitary Tapware - Shower Outlets for Sanitary Tapware for Water Supply Systems of Type 1 and Type 2 - General Technical Specification | 卫生水龙头 - 1 型和 2 型供水系统用卫生水龙头的淋浴出口 - 通用技术规范 |
| UNE EN 1113 | Sanitary Tapware - Shower Hoses for Sanitary Tapware for Water Supply Systems of Type 1 and Type 2 - General Technical Specification | 卫生水龙头 - 用于 1 型和 2 型供水系统的卫生水龙头的淋浴软管 - 通用技术规范 |
| UNE EN 1213 | Building Valves - Copper Alloy Stopvalves For Potable Water Supply In Buildings - Tests And Requirements | 建筑阀门 - 建筑饮用水用铜合金截止阀 - 测试和要求 |
| UNE EN 12293 | Plastics Piping Systems - Thermoplastics Pipes And Fittings For Hot And Cold Water - Test Method For The Resistance Of Mounted Assemblies To Temperature Cycling | 塑料管道系统 - 热水和冷水用热塑性塑料管道和配件 - 已安装组件对温度循环的抵抗力的测试方法 |
| UNE EN 12294 | Plastics Piping Systems - Systems For Hot And Cold Water - Test Method For Leaktightness Under Vacuum | 塑料管道系统- 热水和冷水系统-真空下密封性的测试方法 |
| UNE EN 12295 | Plastics Piping Systems - Thermoplastics Pipes And Associated Fittings For Hot And Cold Water - Test Method For Resistance Of Joints To Pressure Cycling | 塑料管道系统 - 热水和冷水用热塑性塑料管道和相关配件 - 接头耐压力循环的试验方法 |
| UNE EN 1253-1 | Gullies for buildings Part 1: Trapped floor gullies with a depth water seal of at least 50 mm | 建筑物的沟壑 第 1 部分：水封深度至少为 50 mm 的夹层排水沟 |
| UNE EN 1253-2 | Gullies for buildings Part 2: Roof drains and floor gullies without trap | 建筑物的沟壑 第 2 部分：无存水弯的屋顶排水沟和地沟 |
| UNE EN 1254-1 | Copper And Copper Alloys - Plumbing Fittings - Fittings With Ends For Capillary Soldering Or Capillary Brazing To Copper Tubes | 铜和铜合金 - 管道配件 - 用于毛细管焊接或毛细管钎焊到铜管的端部配件 |
| UNE EN 1254-2 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes | 铜和铜合金 - 管道配件 - 第 2 部分：与铜管一起使用的带压缩端的配件 |
| UNE EN 1254-3 | Copper And Copper Alloys - Plumbing Fittings - Fitting With Compression Ends For Use With Plastics Pipes | 铜和铜合金 - 管道配件 - 带压缩端的配件，用于塑料管道 |
| UNE EN 1254-4 | Copper and copper alloys - Plumbing fittings - Part 4: Fittings with threaded end connections | 铜和铜合金 - 管道配件 - 第 4 部分：带螺纹端接的配件 |
| UNE EN 1254-5 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes | 铜和铜合金 - 管道配件 - 第 5 部分：用于毛细管钎焊到铜管的短端配件 |
| UNE EN 1254-6 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends | 铜和铜合金- 管道配件- 第6部分：带推入配合端的配件 |
| UNE EN 1254-7 | Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes | 铜和铜合金- 管道配件- 第 7 部分：用于金属管的压装配件 |
| UNE EN 1254-8 | Copper and copper alloys. Plumbing fittings. Fittings with press ends for use with plastics and multilayer pipes | 铜及铜合金- 水暖配件- 用于塑料和多层管的带压端接头 |
| UNE EN 1286 | Sanitary Tapware - Low-pressure Mechanical Mixing Valves - General Technical Specification | 卫生水龙头 - 低压机械混合阀 - 一般技术规范 |
| UNE EN 1286 | Sanitary Tapware - Low-pressure Mechanical Mixing Valves - General Technical Specification | 卫生水龙头 - 低压机械混合阀 - 一般技术规范 |
| UNE EN 1287 | Sanitary Tapware - Low Pressure Thermostatic Mixing Valves - General Technical Specification | 卫生水龙头 - 低压恒温混合阀 - 通用技术规范 |
| UNE EN 1287 | Sanitary Tapware - Low Pressure Thermostatic Mixing Valves - General Technical Specification | 卫生水龙头 - 低压恒温混合阀 - 通用技术规范 |
| UNE EN 13618 | Flexible Hose Assemblies In Drinking Water Installations - Functional Requirements And Test Methods | 饮用水装置中的柔性软管组件 - 功能要求和测试方法 |
| UNE EN 13828 | Building Valves - Manually Operated Copper Alloy And Stainless Steel Ball Valves For Potable Water Supply In Buildings -tests And Requirements | 建筑阀门 - 用于建筑饮用水的手动操作铜合金和不锈钢球阀 - 测试和要求 |
| UNE EN 15091 | Sanitary Tapware - Electronic Opening And Closing Sanitary Tapware | 卫生水龙头 - 电子开合卫生水龙头 |
| UNE EN 16145 | Sanitary Tapware - Extractable Outlets For Sink And Basin Mixers - General Technical Specification | 卫生水龙头 - 水槽和面盆混合器的可抽出式出口 - 通用技术规范 |
| UNE EN 16146 | Sanitary Tapware - Extractable Shower Hoses For Sanitary Tapware For Supply Systems Type 1 And Type 2 - General Technical Specification | 卫生水龙头 - 用于供应系统 1 型和 2 型的卫生水龙头的可抽出淋浴软管 - 通用技术规范 |
| UNE EN 1717 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow | 水装置中的饮用水污染防护和防止回流污染装置的一般要求 |
| UNE EN 200 | Sanitary Tapware – Single taps and combination taps for water supply systems of type 1 and type 2 – General technical specification | 卫生水龙头 - 1 型和 2 型供水系统的单水龙头和组合水龙头 - 通用技术规范 |
| UNE EN 246 | Sanitary Tapware - General Specifications For Flow Rate Regulators | 卫生水龙头 - 流量调节器的一般规范 |
| UNE EN 248 | Sanitary Tapware - General Specification For Electrodeposited Coatings Of Ni-cr | 卫生水龙头。镍铬电沉积涂层的通用规范 |
| UNE EN 274-1 | Waste Fittings For Sanitary Appliances - Part 1: Requirements | 卫生器具的废物配件 - 第 1 部分：要求 |
| UNE EN 274-2 | Waste Fittings For Sanitary Appliances - Part 2: Test Methods | 卫生器具的废弃配件 - 第 2 部分：测试方法 |
| UNE EN 61770 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets | 连接到水管的电器 - 避免反虹吸和软管组故障 |
| UNE EN 712 | Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull- out under constant longitudinal force | 热塑性塑料管道系统。压力管和管件之间的端部承载机械接头。恒定纵向力下抗拔出性的试验方法 |
| UNE EN 713 | Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes – Test method for leaktightness under internal pressure of assemblies subjected to bending | 塑料管道系统 - 管件和聚烯烃压力管之间的机械接头 - 弯曲组件在内部压力下的密封性试验方法 |
| UNE EN 816 | Sanitary tapware – Automatically shut-off valves PN10 | 卫生水龙头 – 自动关闭阀 PN10 |
| UNE EN 817 | Sanitary tapware – Mechanical mixing valves (PN10) – General technical specifications | 卫生水龙头 – 机械混合阀 (PN10) – 一般技术规范 |
| UNE EN 921 | Plastics piping systems - Thermoplastics pipes - Determination of resistance to internal pressure at constant temperature | 塑料管道系统 - 热塑性塑料管道 - 恒温下耐内压的测定 |
| UNE EN 997 | WC pans and WC suites with integral trap | WC 马桶和 WC 套件，带集成式存水弯 |
| EN 14688 | Sanitary appliances - Wash basins – Functional requirements and test methods | 洗脸盆 |
